Xtreme-DI Ford Mustang 2.3L Injectors

On a 2.3 Mustang with stock turbo, just an XDI-HPFP35 is needed to run full E85. No LPFP, no bigger injectors, no port injection.
Up to 450lbft possible but not recommended with stock motor. 383whp (auto) / 400whp (manual), turbo limited.
With bigger turbo and E85 you need the XDI-HPFP35 and our XDI+55% DI-Injectors for >420whp, up to 500-550whp.
Above 500-550whp on E85 you need the XDI-HPFP60 and our XDI+55% DI-Injectors.
These numbers are not guaranteed, they are highly based on environment and dyno type and calibration.

Housing material: stainless steel, hard coated Aluminum

Tuning Support:  Standalone, SCT, COBB

Dry Weight: 1112 g

• 2000cc/min at 100bar

• 3000cc/min at 220bar

• 684bhp on E30

• 527whp on E85

• Rock solid, perfectly linear.

• 100% drop in fitment

• OEM spray pattern

• stock like cold start and idle

• just one ECU value change

Custom Tuning is required.

Every XDI injector set gets tested and matched at three different operating points and comes with full documentation:
1) 0.8ms/20bar for idle stability
2) 10ms/100bar for static flow reference
3) 6ms/200bar for wot performance and stability