Xtreme-DI
Xtreme-DI Ford Mustang 2.3L HPFP & Injectors for Full E85 Kits
Xtreme-DI Ford Mustang 2.3L HPFP & Injectors for Full E85 Kits
Couldn't load pickup availability
This product is built to order & currently has a 4-6 week lead time ⚠️
XDI has been around for a while and supporting great platforms, one of those being the EcoBoost 2.3L. Providing fueling solutions that meet the mark isn't easy specially when turning up the boost, you need reliable fueling.
We installed the XDI HPFP35 on Bobby's 2016 Mustang EcoBoost and will soon turn it up. Here's our step-by-step installation video for questions or concerns.
This Patent Pending GDI high pressure pump was developed to replace the Bosch OEM high pressure pump. It delivers up to 36% more fuel flow when mounted on the same CAM-Lobe.
Maximum Fuel Pressure is 200bar / 2900psi.
The kit comes with everything you need: the HPFP, an OEM style inlet hose with OEM fuel pressure sensor, a new HP-Line and an electric pigtail.
Customer-specific fittings and lines on request
Straight E85 380 hp GDI only !!! no meth, no PFI, no extra ECUs, no wiring, full control, full OBD Diagnostics
200bar / 2900psi (XDI-HPFP35)
250bar / 3625psi (XDI-HPFP60)
Fuel Compatibility: all known fuels, all Ethanol blends
Electric Connector: Bosch Compact 2-pin
Driver Profile: XDI, tuning changes needed
Accessories: electric pigtail
1.52cc / rev
(+36% capacity over OEM 1.12cc/rev)
Maximum Flow Rate:
240LPH @ 7000rpm (actual measured flow)
Combinations and Power Potential:
On a 2.3 Mustang with stock turbo, just an XDI-HPFP35 is needed to run full E85. No LPFP, no bigger injectors, no port injection.
Up to 450lbft possible but not recommended with stock motor. 383whp (auto) / 400whp (manual), turbo limited.
With bigger turbo and E85 you need the XDI-HPFP35 and our XDI+55% DI-Injectors for >420whp, up to 500-550whp.
Above 500-550whp on E85 you need the XDI-HPFP60 and our XDI+55% DI-Injectors.
These numbers are not guaranteed, they are highly based on environment and dyno type and calibration.
Housing material: stainless steel, hard coated Aluminum
Tuning Support: Standalone, SCT, COBB
Dry Weight: 1112 g
• 2000cc/min at 100bar
• 3000cc/min at 220bar
• 684bhp on E30
• 527whp on E85
• Rock solid, perfectly linear.
• 100% drop in fitment
• OEM spray pattern
• stock like cold start and idle
• just one ECU value change
Custom Tuning is required.
Every XDI injector set gets tested and matched at three different operating points and comes with full documentation:
1) 0.8ms/20bar for idle stability
2) 10ms/100bar for static flow reference
3) 6ms/200bar for wot performance and stability
Share
"The absolute best in the business. Not only is PP extremely knowledgeable but they take care of you as if you are family. Thank you PP team!"
- G. Gonzales -