UPR 11-21 Ford F150 5.0, 6.2 & Ecoboost Plug N Play SC Oil Catch Can

This 2011-2020 F150 Battery Tray mounted single valve kit is the perfect fit for your engine bay.  The generous hose lengths in this kit make it SO versatile, it can be used on stock 5.0 liter, 5.0 with the ROUSH, Magnuson, or VMP Supercharger, 6.2liter F150 and Raptor, as well as Ecoboost V6 trucks!  With its extremely efficient compact design and incredible looking to top it off We went the extra mile to ensure you get the best quality components. This kit is 100% Modular and can be fully disassembled or emptied and cleaned in seconds.   It utilizes UPR Braided Hose and Billet Hose Ends to give you the Strongest and Best Performing Setup Possible- No cheap stock lines here that have been cut and spliced on! Featuring the New UPR Plug N Play ™ Catch Can Fittings, you can empty the can without removing the intake cover or catch can lines from your engine. (UPR Exclusive Push Button Fittings) We have hundreds of hours testing our new Multi-Stage Oil Separator to ensure proven results will exceed your expectations. We even got the largest oil capacity in for a compact highly efficient internal diffuser system. 4 ounces will give you the needed oil capacity to be sue the catch can does not overfill.

 

This new patented design is the most advanced Internal function from coalescing to condensing every aspect was engineered properly. It cannot be compared or confused with units that have side by inlets and outlets with ineffective flimsy honeycomb filters or air compressor filters to keep the cost down and never take into account how critical the separation process is. At UPR make sure that this feature and process of the catch cans performance is protected with the best diffuser systems available. UPR's Patented Multi-chamber diffuser technology in featured in every UPR catch can to capture and filter all the oil vapor and trash from getting into your air intake tract. This is the most critical feature of any catch can system. Manufactured from Domestic T-6 6061 Aluminum bar stock and finished off using only the best Diamond cutters to exceed your expectations of what a superior product should fit and look like.

 

Every UPR Catch Can is designed tested and manufactured in the USA. UPR is the largest aftermarket catch can manufacturer in the country. Continually improving our designs to stay ahead of the competition and give you the cutting edge technology of tomorrow today. We are so confident we offer an unconditional warranty on our products to let you know you can always count on UPRproducts. We do not use plastic catch can fittings like the competition to ensure you will never have any cracks or failures that cheap plastic fittings suffer from.

 

 

 

Upgrade your existing catch can system with the UPR Clean Side Catch Can System for the 2015-2020 Ford F150 5.0L. Includes UPR Plug n Play Fittings to allow you to install the UPR Clean Side Catch Can without any modifications. A simple plug n play system that will outperform anything available. Manufactured from Domestic T-6 6061 Aluminum bar stock and finished off using only the best Diamond cutters to exceed your expectations of what a superior product should fit and look like. UPR is the largest aftermarket catch can manufacturer in the country. Continually improving our designs to stay ahead of the competition and give you the cutting edge technology of tomorrow today. We are so confident we offer an unconditional warranty on our products to let you know you can always count on UPRproducts.

This Clean Side Catch Can is especially beneficial to modified trucks or trucks with added Superchargers or Turbo kits. As crankcase pressure builds up under BOOST, it will be forced out of the driver side valve cover fitting. This clean side catch can will still allow clean air to enter the crankcase as the factory intended, but will catch oil and impurities when crankcase pressure is high preventing that gunk from getting into your cold air kit and throttle body.

* MUST be used with a cold air kit or air filter tube. For those applications running an open supercharger or blower guard, a UPR breather tank connected to the drivers valve cover will work. 5029-100

 

Product Features
» Show Quality Finish
» UPR Plug N Play ™ fittings

» Prevents Oil from Entering Intake
» Exclusive 4 Stage Design Traps Oil
» Innovative Diffuser Tube and Chamber

» Can measures 2.25 x 4.5" 4oz. Capacity
» High Quality CNC Machined Billet Aluminum

» 5/8" Oil Resistant Continental Braided Hose included
» Improves Fuel Economy, Throttle Response & Performance

» High Quality Billet Aluminum Catch Can Fittings (Not Plastic Like the Competition!)
» Available in Satin or Black - Select Finish Above

 

 

Installation
Installs in 10 minutes. Includes:
» 5/8" Continental Braided Hoses
» Plug N Play ™ quick release connectors & billet fittings
» Single Valve Billet Catch Can (Exclusive 4 Stage Design)

 

Fitment
2015 2016 2017 2018 2019 2020 Ford F-150 2.7

2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 Ford F-150 3.5

2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 Ford F-150 5.0

2018-2021 F150 5.0 with ROUSH Supercharger

2010-2014 Ford F-150 6.2