Fore Innovations

Fore Innovations 2018+ Ford Mustang GT L1 Dual Pump Fuel System

Fore Innovations 2018+ Ford Mustang GT L1 Dual Pump Fuel System

Regular price $1,819.00
Regular price Sale price $1,819.00
Sale Sold out
Shipping calculated at checkout.
Fuel Type
Fuel Pump Selection
Electrical Options
MAP or static referenced direct injection supply fuel system up to 800 rwhp with dual fuel pumps (recommended to run one pump full time, then activate secondary pump under load) with gasoline or race gas (not recommended for use with E85 due to use of stock fuel rails). Supplies High Pressure Fuel Pump (HPFP) and port injection (and small wet nitrous) Includes in-tank supply system that retains OE transfer, fuel level sender, and EVAP functionality, upgraded feed and return lines, high capacity filtration and check valve, flow through t-block direct mounted on HPFP inlet tube, high capacity F2i regulator with provisions for both static and MAP reference.

Dual fuel pump system
  • 800 rwhp fuel system for gasoline, not recommended for E85
  • supplies OE HPFP and port injection, as well as small wet nitrous
  • single fuel pressure regulator, uses OE fuel rails
Fuel system should not be used with E85 due to limitations with the OE fuel rails (use L1E or L2 fuel systems instead).

INCLUDES
  • S550 Mustang Dual Pump Module
  • F2i Fuel Pressure Regulator (may be configured boost reference or static)
  • 128mm Inline Fuel Filter
  • FCV Check valve
  • 0-100psi Fuel Pressure Gauge
  • Stainless Steel Filtration Media (E85 safe)
  • T-block to direct mount on HPFP (High Pressure Fuel Pump)
  • All fittings, hose, hardware required for typical fuel line plumbing
-30 feet of fuel line (your choice of type)
-10 billet compression style hose ends (6 x straight, 4 x 90 degree)
-Qty 5, billet low profile 90 degree AN to ORB swivel fittings
-Qty 2, billet straight AN to ORB fittings
-Qty 1, 3/8 EFI female to ORB-10 male adapter
-Qty 2, 3/8 EFI female to AN-8 male adapters
-Qty 1, ORB-8 plug
-Qty 10, hose straps with stainless mounting screws

FUEL PRESSURE SETTINGS:
1. Fuel pressure with static fuel pressure regulation must be set to [43 psi + maximum boost] or 54 psi (whichever is greater).
2. Fuel pressure with manifold referenced fuel pressure regulation must be set to 54psi during idle. (boost signal after throttle body)
3. Fuel pressure with boost referenced fuel pressure regulation should be set to 58 psi with vacuum off. (boost signal before throttle body)
4. Use L1E or L2 fuel system to operate outside these parameters.

This is a stand alone fuel system. Professional installation and a custom tune is required. Qualified installers and tuners must be able to interface to the OE harness and FPDM, understand proper component placement, hose routing, and deliver the vehicle with factory-like pump prime/on/off logic with no error codes. Fore Innovations will supply basic system schematics and detailed component level instructions, and can provide troubleshooting of the performance and function of our system and components. Fore Innovations will not provide assistance with ECU integration/tuning or elimination of alarm codes or the CEL.

This fuel system generates substantially more heat and capacity than the original fuel system. The high powered fuel pumps make much more heat than the factory pump and the composite fuel tank construction acts as an insulator and stores heat. Additionally, the shape of the factory fuel tank limits the pickup capacity of this fuel system. The user (driver) must keep more fuel (than normal) in the tank at all times to minimize heat damage and ensure adequate fuel pickup.

FITS: 
  • 2018+ Mustang V8 (except GT350)

View full details

"The absolute best in the business. Not only is PP extremely knowledgeable but they take care of you as if you are family. Thank you PP team!"

- G. Gonzales -